МSО-AW

Fields of application

• MSO-AW can be used mainly in aqueous binders and for the treatment of substrates.
• It can also be used as a component of waterborne lubricants or as an additive.
• When used together with binders based on silicone emulsions, EMSO-M and EMSO-DM acts as an enhancer of the water-repellent effect of these binders.
• Even though silicone emulsion binders provide a very good hydrophobic effect, this effect can be significantly improved by the addition of MSO-AW.
• The working solution is prepared immediately before its use.
• During storage, slight separation of the liquid base may occur. Stir before use.
• Particular advantages are observed with water-based systems.

It is an essential ingredient in products obtained in many industries:

• mineral wool - insulating material;
• fiberglass / fiberglass composites - as a component and / or decoration;
• primer for glass and metals;
• abrasives: as an additive to a phenolic binder;
• molding resins: as an additive to cold curing phenolic and furan resins;
• sealants and adhesives: as a primer or additive to improve adhesion on glass, metals and plastics;
• polymers / composites with mineral fillers: for pretreatment of fillers and pigments or as an additive;
• paints and coatings: as an additive or as a primer to improve adhesion to the substrate.

Examples of suitable inorganic substrates: glass, fiberglass, glass wool, mineral wool, quartz, sand, cristobalite, voplastonite, mica, aluminum trihydrate, magnesium dihydrate, kaolin, talc and other silicate fillers, metal oxides and metals.

Can be used with polymers such as epoxy, phenolic, furan, melamine resins, polyurethanes, polyamides, polybutylene terephthalates, polycarbonates, EVA, modified polypropylenes, PVA, acrylates and silicones.