Our phone
+380674077962
Write to us
office@silkor.com.ua
Skip to content Emulsion MSE-50/43 is a solvent free aqueous emulsion of oligodimethylhydrosiloxan and of mineral oil.
It is intended for dedusting and additional water-repellent treatment during manufacturing of various materials, including fiberglass and mineral wool products, treated by phenol-formaldehyde resin
Oil-silicone emulsion MSE-50/43 is used in conjunction with a binder in the production of insulating materials:
Oil-silicone emulsion MSE-50/43 addition to phenol-formaldehyde binder composition:
The addition of oil-silicone emulsion MSE-50/43 to the binder composition for the production of mineral wool improves the properties of the finished products:
Emulsion MSE-50/43 is applied by spraying together with binder and other additives.
To precipitate the forming fibers, dusting reducing and plasticizing, it is included in the composition of the binder solution in the form of a 50% emulsion in an amount of 2-3% introduced directly into the reactor where the binder solution is prepared.
Reprocessing of fiberglass and mineral wool products after curing of the emulsion МSE 50/43 is not recommended.
The amount of applied emulsion МSE 50/43 depends on the desired properties of the end product, therefore, to determine the optimum quantity, individual tests must be carried out.
Normally, the sufficient amount of emulsion is 0.6-1.2% by weight of dry fibrous material.
Always test the selected concentration of МSE 50/43 on the trial sample to determine the optimal amount of material and the suitability for use in a particular case.
Store at a temperature from +5°С to +40°С. Store in original containers in cool, dry, well-ventilated place, protected from moisture and direct sunlight, away from heaters, also tanks with strong oxidizing agents.
The guaranteed shelf life in original container is 6 months.
Storage over the date specified on the label does not necessarily mean the product is unusable. In case if store more please check the properties of product before use.
polymer canisters up to 25 dm3;
polyethylene drums up to 50 dm3;
combined barrels / steel-polyethylene 200 dm3;
barrels polyethylene up to 220 dm3;
special polymer containers up to 1 m3.
Detailed instructions are given in the relevant product safety data sheet. It can be provided upon request.
| Parameter name and measure unit | Standard |
|---|---|
| Appearance | Homogeneous liquid free of mechanical impurities, color is not standardized |
| Mass fraction of nonvolatile substance, %, min | 48 |
| Relative viscosity at a temperature (+20±2,0)°C, s | 30 – 150 |
| Stability at a dilution, hour, min | 24 |
