Our phone
+380674077962
Write to us
office@silkor.com.ua
Skip to content Silicone emulsion КE 10-01 – 70% water emulsion of polydimethylsiloxane liquid (silicone oil). Before use, diluted with water 1:10.
The release agent KE 10-01 forms on the treated surface a cross-linked polymer layer - ultrathin, durable, flexible membrane, operable due to +200°C.
The main function is the release agent (separating / anti-adhesive) agent:
Application in the printing industry:
Lubricant and grease:
Additive for production:
Car service:
Textile industry:
Building sector:
The emulsion КE 10-01 (70%) is applied on dry, clean surface with a brush, roller or sprayer leaving no excess material and drops.
Before application the emulsion is diluted with water to concentration 10% (in 1-10 times, with intensive mixing conditions).
For porous materials, it is better to use more concentrated solutions. During storage, an oil film may form. Mix before use.
Always test the selected concentration on the trial sample to determine the optimal amount of material and the suitability for use in a particular case.
Store in original container at temperature from +5°C to +30°C. Store in a dry, cool, well-ventilated place, away from sources of ignition and high temperatures. Protect from direct sunlight and freezing.
Store away from strong oxidizers.
The guaranteed shelf life in original container is 12 months.
Storage over the date specified on the label does not necessarily mean the product is unusable. In case if store more please check the properties of product before use.
Polymer canisters 20 dm3.
Polymer capacities up to 100 dm3.
Plastic drums – 200 or 275 dm3.
Polypropylene container - 1 m3.
The emulsion is non-toxic, not flammable. There is no irritation to skin at short term contact usually. Remove in mechanical way with a cloth or paper. Rinse with a plenty of water or water with soap. After contact with eyes there is no need in medical care usually.
Detailed instructions are given in the relevant product safety data sheet. It can be provided upon request.
| Parameter name and measure unit | Standard |
|---|---|
| Appearance | Homogeneous white liquid without mechanical impurities |
| Mass content of solid silicon, % | 25 – 28 |
| pH of aqueous extract | 6,0 – 7,5 |
| Surface tension mN/cm, max | 40 |
| Stability at dilution, h, min. | 24 |
