Our phone
+380674077962
Write to us
office@silkor.com.ua
Skip to content Silicone liquid GKZH 136-157М is low viscosity colorless or pale yellow oligomethylhydridesiloxane polymer.
Silicone compounds dissolve well in aromatic and chlorinated hydrocarbons, easily gelled by the action of amines, amino alcohols, strong acids and alkalis. Silicone water-repellent GKZH 136-157М is insoluble in water and lower alcohols.
Liquid GKZH 136-157М is a water-repellent agent for surface and volumetric treatment of the porous mineral materials like gypsum, cement, ceramics.
Synonyms: Hydrosilicone oil; Hydrogen silicone oil; Methyl H polysiloxane; Polymethyldrosiloxane; Methylhydro-siliconeoil; Poly(methylhydrosiloxane); methyl silicone oil; Methyl Hydrogen Silicone Fluid; methylhydrogensiloxane polymer.
CAS No. 63148-57-2
Chemical Name: Poly(methylhydrosiloxane)
CBNumber: CB0694968
Molecular Formula: C7H22O2Si3
Silicone liquid GKZH 136-157M is usually used in the form of a diluted solution or aqueous emulsion.
During volumetric hydrophobization, the silicone liquid GKZH 136-157 M is added to the gypsum mixing water. To achieve the water absorption reducing effect, about 0.2-0.4% of the liquid from the amount of dry gypsum is sufficient. The addition of water repellent agent in terms of pure silicone is 0.15-0.2% of the gypsum binder. The effectiveness of the hydrophobic additive GKZH 136-157M application depends on the quantitative and qualitative composition of the gypsum mixture, therefore it is always necessary to conduct preliminary tests to determine the optimal amount.
For hydrophobic treatment of surfaces, GKZH 136-157M silicone water-repellent liquid is used after dilution with one or a mixture of several hydrocarbon solvents (white spirit, solvent, acetone or ethyl methyl ketone).
Dilution rate: on 1 liter of silicone liquid GKZH 136-157M - 10 liters of solvent. Diluted water-repellent solutions can be applied by dipping, spraying or brushing. To apply a working hydrophobic solution on the dry, cleaned surface to the termination of absorption, avoiding drips.
Consumption depends on the processed material surface porosity. The average consumption is 0.2-0.4 l/m2. Always test the selected fluid concentration on a small sample of material to determine its suitability.
Store in original container at temperature from -30°C to +30°C. Store in a cool, dry, well-ventilated place. Protect from moisture and direct sunlight.
Store away from oxidizers, strong acids, alkalis and other chemicals having alkaline reaction for example, ammonia, amines).
The guaranteed shelf life in original container is 12 months.
Storage over the date specified on the label does not necessarily mean the product is unusable. In case, if store more please check the properties of product before use.
The container must be equipped with a safety valve.
Fluid 136-157M is nontoxic, explosion-proof, noncorrosive, it does not emit harmful vapors and gases, does not irritate the skin and mucous membranes of the eyes, physiologically harmless.
Fluid 136-157M is combustible.
Safety information is not included in this document. Detailed instructions are given in the relevant product safety data sheet. It can be provided upon request.
| Parameter name and measure unit | Standard |
|---|---|
| Appearance | Colorless clear oily liquid |
| Density at temperature (+25±0,5)°С, g/cm3 | 0,990-1,010 |
| Kinematic viscosity at temperature (+25±0,5) °С, cSt | 20-30 |
| The refractive index at a temperature (+25±0,5)°С | 1,396-1,410 |
| Dry residue (+105±2)°С, 3h, % (Mass fraction of active hydrogen, %) | 1,5-1,6 |
| Reaction of the medium, рН | 6,0 – 7,0 |
| Flash point in open cup, °С, min. | 130 |
| Water-repelling ability, h, min | 3 |
