...

Resin MSO-RDM

Name
Resin MSO-RDM
Product description

МSО-RDM is a solution of a functional polymethylsiloxane oligomer with residual alkoxy groups in toluene or xylene.

Our products

Binder for heat-resistant paints, anti-corrosion coatings, electrical insulating sealants. Water repellent for stone, limestone, concrete. Release coating for molds.
Fields of application
  • Suitable for all types of heat-resistant paints: for (anti-corrosion) coatings for mufflers, exhaust systems, engine parts, boilers, stoves, ovens, chimneys, barbecues, electric and gas heaters;
  • can be used as a binder alone or in combination with other organic resins for high quality weather resistant paints;
  • in diluted form it can be used for impregnation of mineral building materials, in particular, for water-repellent treatment of natural stone, especially limestone;
  • can be used as a binder for the production of electrical insulating and heat-resistant sealants or plates;
  • due to its excellent release properties, MSO-RDM can be used as a mechanically resistant release coat for molds for casting and pressing of resins, plastics and rubbers. For this, the coating must be thermally cured.
Benefits
  • Good balance of plasticity, hardness, heat resistance, weather resistance and hydrophobicity of the coating;
  • relatively low viscosity of the solution;
  • impregnation with МSO-RDM reduces the degree of damage to the surface of natural stone, increases resistance to frost and salt fog, reduces energy losses due to protection from getting wet;
  • surfaces of building materials impregnated with МSO-RDM demonstrate a significantly lower tendency to contamination.
Application

Comprehensive instructions for preparing formulations are available upon request.

General recommendations:

  • you can use any heat-resistant inorganic, white, silver, black and colored pigments;
  • aluminum pigments provide the best heat resistance;
  • depending on the method of drying the treated surfaces and pigments, a heat resistance of 400°C to 600°C is achieved;
  • mica and talc can be used as fillers;
  • proper dispersion of pigments and fillers in the paint should be ensured;
  • sandblasting and degreasing of the base is recommended;
  • coating can be applied by spraying, dipping and brushing;
  • the coating acquires optimum mechanical properties and resistance to oils after baking (the temperature range is adjusted to);
  • recommended dry film thickness is 15 to 25 µm.
Storage

Store in original tightly closed container at temperatures from 0°C to +30°C.

Store in original containers in a dry, cool and ventilated place, away from sources of ignition and high temperatures. Protect from direct sunlight. Keep away from alkalis, strong oxidants and strong acids.

The guaranteed shelf life in original container is 12 months.

Storage over the date specified on the label does not necessarily mean the product is unusable. In case if store more please check the properties of product before use.

Packaging

Steel barrels with a capacity of up to 200 dm3.

Safety information

Detailed instructions are given in the relevant product safety data sheet. It can be provided upon request.

Parameter name and measure unit Standard
Appearance Colorless or slightly yellowish liquid with slight opalescence
Mass content of solids, %, min. 50,0
Density at temperature (+25,0±0,5)°С, g/cm3 0,950 – 1,050
Kinematic viscosity at temperature (+25±0,5)°С, cSt, min 3,0 – 50,0
*Variable depending on the purpose
Замовити дзвінок
Як Вам зручно отримати від нас зворотний зв'язок
Наш телефон

+380 (44) 330-06-47

Написати нам

office@silkor.com.ua

Order a call
How convenient is it for you to receive feedback from us
Our phone

+380 (44) 330-06-47

Write to us

office@silkor.com.ua