Our phone
+380674077962
Write to us
office@silkor.com.ua
Skip to content Aquaprok-3 is a decorating properties water-repellent impregnation for building materials surfaces processing (natural stones, concrete, etc.).
Aquaprok-3 is a product of hydrolysis and polycondensation of polyesters orthosilicic acid.
Hydrophobic impregnation agent Aquaprok-3 is suitable for the protective treatment of the next materials:
Applied for treatment of new surfaces in order to preserve their attractive appearance.
Aquaprok-3 imparts wet stone effect.
During restoration works water-repellent impregnation Aquaprok-3 is used for fastening, preservation and conservation of loose weathered low binders content materials (bricks, natural stones).
Due to the weathered zone processing Aquaprok-3, the stone is restored the original strength, the color of the stone becomes deeper and more saturated, while the effect of a "wet stone" is also created.
The water-repellent agent Aquaprok-3 is ready to use.
The impregnation is used for the treatment of a perfectly dry and clean stone. Moisture, dirt or dust can affect the result, in particular the uniformity of the treated surface. Use as much liquid as the stone can absorb under normal conditions. Treat in dry weather, when the temperature of treated surface is in the range of +5°C to +30°C. Do not perform work during the rain, wait the texture layer is dried. Protect treated surface from precipitation until water-repellent agent is dried (about 24 hours at +20°C).
Coating: Apply on dry surface until the termination of absorption. Do not allow flowing and leaving drops.
Application methods: wall brush, roller or spraying.
The consumption of the agent depends on the porosity of the treated material and it averages 120 ml per 1 m2 of natural stone.
Store at temperature from -40°C to +30°C in tightly closed and labeled original container only. Keep container in cool, dry, well-ventilated place away from heat, fire danger places, oxidizers, strong acids, alkalis and other inorganic chemicals. Protect from moisture and direct sunlight.
The guaranteed shelf life in original container is 3 months.
Storage over the date specified on the label does not necessarily mean the product is unusable. In case if store more, please, check the properties of product before use.
Polymer containers with a capacity of 25 l.
Polymer drums with a capacity of 50 l.
Polymer drums with a capacity of 200 l.
Polymer drums with a capacity of 220 l.
Special polymer containers (IBC containers) up to 1 м3.
Keep away from fire! The product is a combustible fire-hazardous material, it irritates the skin and mucous membranes. Observe fire safety rules when working. It is recommended to use protective cloth, gloves and glasses or face protection means. Spraying is carried out from the windward side. Wash hands thoroughly after handling. In case of contact with skin or eyes rinse with a plenty of water and seek medical care. Keep away a food.
Detailed instructions are given in the relevant product safety data sheet. It can be provided upon request.
| Parameter name and measure unit | Standard |
|---|---|
| Appearance | Transparent or opalescent liquid |
| Mass fraction of hydrogen chloride, %, max | 0,07 |
| Kinematic viscosity at (+20±0,5)°C, cSt | 2,2 – 3,6 |
| Gelling time, minutes, max | 30 |
| Density (+20±0,5)°C, g/cm3 | 0,895 – 0,920 |
| Mass fraction of SiO2, % | 17,0 – 21,0 |
